manual

MODEL 91XX/97XX CONFIGURATION MANUAL
122
enabling this feature, check to make sure your particular processor supports
it. Otherwise, your terminal could be in violation of network rules and be
sanctioned.
To enter or change an ISO go to the SELECT ISO TO CHANGE screen and
perform the following:
1.) Press the Screen Key next to the block where the new ISO
will be entered or an ISO changed.
2.) Enter the ISO number (up to six digits in length).
3.) Press the “<OK>” key.
If more than one ISO must be entered repeat steps 1 through 3 until
all ISO are entered (up to five ISO numbers may be entered). As noted
previously, additional ISO numbers can be entered via Triton Connect,
up to the 100-number limit.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.