manual

MODEL 91XX/97XX CONFIGURATION MANUAL

116

FUNCTION: RESET SEQ #

ACTORY DEFAULT: N/A

CCESS INSTRUCTIONS:

1.) Select TERMINAL CONFIGU-

RATION from the MANAGE-

MENT FUNCTIONS menu.

2.) Select SET TERMINAL PA-

RAMETERS.

3.) Choose the RESET SEQ # op-

tion.

ESCRIPTION:

Select the RESET SEQ. # option from the TERMINAL PARAMETER

menu to reset the sequence number that is printed on the journal printout

and receipt to ‘00000000’.

Resetting the SEQUENCE # is an operation that should usually be performed

at the request of your processor. Use of this function is not required during

normal operation.

RROR CONDITIONS:

There are no error conditions directly associated with this function.

THIS COMMAND IS USED IN THE:

9100 9110 9700 9705 9710

9750

*NOTE*

This feature is not supported by all processors.