manual

MANAGEMENT FUNCTIONS
113
FUNCTION: TERMINAL OWNER
FACTORY DEFAULT: NONE
A
CCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select CHANGE MESSAG-
ES.
3.) Select TERMINAL OWNER.
D
ESCRIPTION:
The name of the TERMINAL OWNER is stored in the terminal and displayed
to the customer in the surcharge warning message. The name is entered
directly into the terminal.
To enter a digit 0-9, simply press the key that has that digit. To enter a let-
ter, first press the <BLUE> key, then press the key that has the letter you
want on it. The first press of the key will display the first character above
the number. Subsequent presses will display the characters in sequence.
When the character you want is displayed, press the <RIGHT ARROW>
key to ‘lock in’ the letter. If your next character is a letter, you must press
the <BLUE> key again.
The name can be up to 18 characters long.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750