manual

MANAGEMENT FUNCTIONS
111
FUNCTION: EXIT MESSAGE
F
ACTORY DEFAULT: ‘THANK’S FOR
U
SING MINIATM’
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select CHANGE MES-
SAGES.
3.) Select EXIT MESSAGE.
D
ESCRIPTION:
The Exit Message consists of three
lines of text that are printed on the
terminal display at the conclusion
of a transaction. The text can be
full alphanumeric text. Enter let-
ters, numbers and punctuation as
follows:
The keys along either side of the
display are used with the numeric
keys on the main keypad to permit
entry of alphanumeric characters. The keys on the left side of the display
are designated <F1> through <F4>. The keys on the right side of the display
are <F6> through <F8>. The <F1> key centers the text on the line where the
cursor appears. The <F2> key erases all text in the current message. <F3>
clears the text on the line the cursor is currently appearing.
The <F4> Key is used similarly to a CAPS LOCK key on a computer key-
board. Pressing the <F4> key toggles between uppercase and lowercase.
To enter an alphabetic or punctuation character, one of the <F6> through
<F8> keys must be pressed, followed by one of the numeric keys. The
resultant character will be as indicated in the table. Press the <OK> key to
save the changes made. If you make a mistake and want to start over, press
the CANCEL key to discard any changes made to that point.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
9%+
&
2%005

 

 
 


TFIH3O. 
TFE,&1!$'*-047
RETNE#&:"%(+.258
THGI2&P3#&),/369
&
2%7/,
TFIH3O. >
TFE,&QADGJMPTWg
RETNE#&ZBCHKNRUX
THGI2&CFILOSVY
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750