manual

MANAGEMENT FUNCTIONS
109
FUNCTION: WELCOME MESSAGE
F
ACTORY DEFAULT: ‘WELCOME
TO
MINIATM’
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGU-
RATION from the MANAGE-
MENT FUNCTIONS menu.
2.) Select CHANGE MESSAG-
ES.
3.) Select Welcome Message.
D
ESCRIPTION:
The Welcome Message consists of
three lines of text that are printed
at the top of the customer welcome
screen. The text can be full alpha-
numeric text. Enter letters, numbers
and punctuation as follows:
The keys along either side of the dis-
play are used with the numeric keys
on the main keypad to permit entry
of alphanumeric characters. The
keys on the left side of the display
are designated <F1> through <F4>. The keys on the right side of the display
are <F6> through <F8>. The <F1> key centers the text on the line where the
cursor appears. The <F2> key erases all text in the current message. <F3>
clears the text on the line the cursor is currently appearing.
The <F4> Key is used similarly to a CAPS LOCK key on a computer key-
board. Pressing the <F4> key toggles between uppercase and lowercase.
To enter an alphabetic or punctuation character, one of the <F6> through
<F8> keys must be pressed, followed by one of the numeric keys. The
resultant character will be as indicated in the table. Press the <OK> key to
save the changes made. If you make a mistake and want to start over, press
the CANCEL key to discard any changes made to that point.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.
9%+
&
2%005


 
 
 
 
TFIH3O. 
TFE,&1!$'*-047
RETNE#&:"%(+.258
THGI2&P3#&),/369
&
2%7/,
TFIH3O. >
TFE,&QADGJMPTWg
RETNE#&ZBCHKNRUX
THGI2&CFILOSVY
THIS COMMAND IS USED IN THE:
9100 9110 9700 9705 9710
9750