Owner Manual

2
SPEECH INSTALLATION GUIDE
** Important **
The upgrade procedures may require removal and replacement of electrostatic
sensitive devices such as integrated circuits, boards, and assemblies. ESD
wrist straps should be worn and connected to a common ground point to
prevent hazardous electrostatic discharge to sensitive components. Failure
to follow proper handling or use of these items may result in damage from
ESD.
* NOTE *
This instruction is to be used for the installtion of the speech jack on 96xx
units that have had the PCI Keypad (oyster) kit upgrade completed. There
should be no software nor circuit board replacement requirement.
Updates:
April 4, 2011 original
September 28, 2011 picture edits
March 27, 2012 picture edits