Manualshelf

Owner Manual

ManualsBrandsTriton Systems ManualsOther9600 Series
12345678910
5
MULTIFUNCTION/SPEECH INSTALLATION GUIDE
3. Drill a pilot hole using the 1/8” drill bit and finish using the 7/16" bit (Figures
4 and 5).
4. Open the control panel and feed the headphone cable (audio jack side first,
Figure 6) through the hole (exterior) until the headphone plug is flush in the
hole (Figure 7).
Figure 4. Drill pilot hole. Figure 5. Finish with 7/16" bit.
Figure 6. Feed cable in hole. Figure 7. Headphone plug flush.
5. (Inside control panel) Secure the headphone plug with the retainer clip
shown in Figure 8. Insert the retainer clip half way.
Figure 8. Insert retainer clip to secure.