Owner Manual

2
MULTIFUNCTION/SPEECH INSTALLATION GUIDE
** Important **
The upgrade procedures require removal and replacement of electrostatic
sensitive devices such as integrated circuits, boards, and assemblies. ESD
wrist straps should be worn and connected to a common ground point to
prevent hazardous electrostatic discharge to sensitive components. Failure
to follow proper handling or use of these items may result in damage from
ESD.
* WARNING NOTE *
• The 9XXX Software required with this upgrade may be obtained
from the Triton partner web site. Always use the latest version of software.
• You must have your EPROM access code to load software. DO NOT
begin the hardware installation without this code. If you do not have this
code, the memory module and multifunction board must be returned to Triton
to reset. Call Triton Technical Support (800.259.6672) for clarification.
Updates:
November 30, 2011 Original.
March 15, 2012 Edits to clarify EPROM access code requirement.
March 27, 2012 picture edits