Owner Manual

6
PCI EPP and Card rEadEr UPgradE ProCEdUrEs
Software Requirements US
Model Full Load Software Version Update Software Version
9600 XD910080.00 (monochrome display) XAT-9180.00 (monochrome display)
9600 XD920080.00 (Color display) XAT-9280.00 (Color display)
Software Requirements Canada
Model Full Load Software Version Update Software Version
9600 XD890076.00 (Color display)
To enable EMV support, the follow-
ing plug-ins must also be installed:
EMVK0000.B96
EMVA0000.B96
XAT-8976.00 (Color display)
To enable EMV support, the follow-
ing plug-ins must also be installed:
EMVK0000.B96
EMVA0000.B96
9600 XD880076.00 (Monochrome display)
To enable EMV support, the follow-
ing plug-ins must also be installed:
EMVK0000.B96
EMVA0000.B96
XAT-8876.00 (Monochrome display)
To enable EMV support, the follow-
ing plug-ins must also be installed:
EMVK0000.B96
EMVA0000.B96
• To load the EMV les, the latest version of TriComm (v2.1.22) must be used.
• Ensure TriComm v2.1.22 is loaded on your laptop and operational before proceeding
to your ATM site.
• Refer to Release Notes Canada 7.0 for further information.
• Software les, TriComm and the Release Notes can be obtained from
www.Triton.com partner site in the appropriate .zip le.
WARNING:
• Software for Canada and US must be loaded AFTER the hardware up-
grade. Loading the software rst will cause the loss of valuable data when
the hardware is updated.
• Ensure you have obtained the correct software from the Triton partner web
site and loaded it on your laptop before going to your ATM location.
• Read this manual and the Software Release Notes fully before proceeding.
• Don’t forget your laptop to ATM load cable.
US software does not require the latest version of TriComm to load.