Owner Manual

3-2

Quad Port Board to Multi-function Board uPgrade Procedures

This section removes and replaces any tri-port, quad-port, expanded memory, or blank panels in your

9600, and upgrades with a Multifunction Board.

1. Remove any boards or blank panels from slots 4, 5

& 6.

2. Install the new Multifunction board into slot 4 (four)

ONLY. Secure the board with the push in snaps.

Install the Memory Expansion module (if you have

one) in slot 5 (ve) ONLY. Replace the blank panel

in slot 5 (ve) if necessary, and slot 6 (six). Secure

with the push in snaps.

3. If you have a Memory Expansion Module, re-jumper

J1 and J2 for AUX 2. (pins 2 & 3)