Owner Manual

2-2
PCI EPP KEyPad UPgradE ProCEdUrEs
rEmovE and rEPlaCE ProCEdUrES
This section removes the current keypad, and replaces it with a PCI EPP T7 keypad. Your key pad will
be applicable for your location.
1. Remove all cables from your
applicable SPED adaptor board.
2. Remove 4 (four) screws holding your
SPED adaptor board.
3. Remove 4 (four) standoffs holding your keypad.
4. Loosen 2 (two) screws holding the screen panel
mounting bracket.
5. Remove the keypad from under the screen panel
mounting bracket.