Owner Manual

2
9100 SINGLE TO DUAL POWER SUPPLY CONVERSION
CONTENTS
PERFORMING THE 9100 SINGLE TO DUAL POWER SUPPLY CONVERSION
INTRODUCTION ..........................................................................................................................................2
SCOPE ......................................................................................................................................................2
OVERVIEW ...............................................................................................................................................2
REQUIRED PARTS AND TOOLS ....................................................................................................................3
REMOVAL OF THE 9100 SINGLE POWER SUPPLY ..........................................................................................4
INSTALLATION OF THE DUAL POWER SUPPLY ...............................................................................................5
INTRODUCTION
This guide covers the steps for converting the 9100 series terminal from a single to a dual power supply con-
fi guration. The following procedures include a list of tools and the hardware required for the conversion.
SCOPE
The following procedures apply to all Triton certifi ed service personnel involved in the process of maintaining
or converting Triton ATMs.
OVERVIEW
The 9100 Single to Dual Power Supply Conversion will require the replacement of the power supply assem-
bly. The kit includes all cabling and associated mounting hardware. The single power supply will be replaced
with a dual power supply and its associated adapter bracket. Additional primary components of the kit in-
clude a 6” AC extension cord, new power cables for the printer controller and docking boards, as well as the
Mini-Mech and TDM dispensers, and a cabinet ground wire for any applicable TDM installations that do not
currently have one.
DOCUMENT UPDATES
APRIL 27, 2012 REMOVED SPARE FUSE FROM KIT
M
ARCH 14, 2014 UPDATED PART NUMBERS