Owner Manual

6
TDM TO MINIMECH CONVERSION PROCEDURES
Figure 6. Grounding strap secured to
dispenser tray mounting bolt.
Figure 8. Turn tray to clear door edges.
Figure 9. Dispenser tray removed from
cabinet.
Figure 7. Location of dispenser tray
mounting bolts. (from bottom)
REMOVE THE DISPENSER TRAY
1. Remove the nut that secures the cabinet grounding strap to the mounting bolt that supports the left-front corner of the
dispenser tray (Figure 6). Remove the nuts from the remaining mounting bolts (Figure 7).
2. Lift the tray up and away from the bolts and remove it from the cabinet. You will need to turn the tray slightly to clear
the edges of the cabinet opening.