Owner Manual

4
TDM TO MINIMECH CONVERSION PROCEDURES
REQUIRED PARTS AND TOOLS
TOOLS REQUIRED
#1 & #2 Phillips Screwdrivers, 1/4 & 11/32 inch nut drivers, miniature fl at tip screwdriver
MODEL 9100 TDM to MiniMech CONVERSION KIT
P/N 06100-08134
PARTS SUPPLIED
PART
NUMBER
DESCRIPTION
QUAN-
TITY
09120-07054 Mini-Mech Power Cable 1
09120-00073 Cable|DC|Power Supply to Docking Board 1
09120-07095 AC Power Extension Cable 1
09110-01214 Power Supply|SubAssy 1
03011-05216 Power adaptor bracket 1
02054-00302 Screw|#8-32|3/8”|Type B Thread Forming||Hex Head|| 3
02301-00024 Nut|#8-32|Hex Nut|Ext. Tooth Washer 7
03072-00015 6 Inches TY Wraps 4
05200-00399 9XXX Software Upgrade 1
09120-00388 Cable|Power|Printer 1
03011-52027 Bracket, Mech Mount 1
09120-07048 EJ to MiniMech comm cable-right angle 1
02054-00309 Screw|#10-32 x|1/2” L|Machine Screw w/ Washer|Pan Phil 2
09200-00075 Yellow EJ (Electronic Journal) 1
03011-01481 EJ mount bracket 1
02301-00041 Nut|1/4-20|||Kep Nut 4
09120-00311 EJ to Main board cable 1
09005-00600 Dispenser MiniMech with Cassette 1
03072-00038 Cable Clip|3/4” Round, Screw-In|Quick Release| 1
03072-00027 Cable Clip
1
02617-00031 Strain Relief Plugs
2
01200-00043 Fuse|Medium Blow|4A Spare 1
02054-00169 Screw|#8-32|3/8 Inch|Pan Phil Head w/Ext Tooth Wash| 2
00000-00201 Serial Number(Cassettes) 1 or A 1
07102-00079 TDM to MiniMech Installation Instructions 1