Owner Manual

2
POWER SUPPLY UPGRADE PROCEDURES (9100 W/TDMS)
REQUIRED PARTS AND TOOLS
PURPOSE
This guide covers the steps for upgrading the power supply assembly in the Model 9100 ATM with TDM dispensing
mechanisms. This procedure includes a list of all tools and hardware necessary for the conversion as well as the steps
involved.
SCOPE
This procedure applies to all service personnel involved in the process of maintaining or converting Triton ATMs.
REPLACING THE POWER SUPPLY A SSEMBLY USED WITH TDM DISPENSERS
REMOVE THE POWER SUPPLY A SSEMBLY:
1. Turn off the AC input power to the ATM by placing circuit breaker at the main electrical panel to the OFF position
or unplugging the ATM from the wall outlet.
2. Unlock and open the control panel. Push the AC power switch on the power supply to the OFF (0) position.
3. Unplug the AC power input plug from the top of the power supply. Unplug any AC power output plug from the
power supply.
AC Power
4. Carefully cut and remove all the Ty wraps secure the DC power
cable harness, telephone line and ground wire in the cable bundle.
)0019(tiKedargpUylppuSrewoP
)93100-00260N/P(
revirdtuN)mm7("4/1:deriuqeRslooT
srettuclanogaiD
rebmuNtraP noitpircseD
80210-01190naF/wyssAylppuSrewoP
99300-00250DCedargpUerawtfoSXXX9
1
94000-30170
serudecorPedargpUylppuSrewoP
1
DCedargpUerawtfoSnodetacoL