Owner Manual

54
MODEL 8100 USER / INSTALLATION MANUAL
TRITON CONNECT
HOST NUMBERS
DESCRIPTION:
The HOST NUMBERS are provided by
your Processor/Host Network
administrator. If you are using TCP/IP
as your communication type, you will
need to enter HOST TCP/IP ADDRESSES.
The first part of the address consists
of a sequence of four groups of
numbers. Each group can be up to three
digits long, and each group is separated
by a period (dot character), as in this
example: 123.3.01.99 The second part
of the address is a PORT NUMBER,
consisting of four (4) digits or less,
separated from the first part by a comma
(“,”) character, as in this example:
123.3.01.99,9043.
Follow these steps to initially enter or
change the PRIMARY HOST NUMBER
(ADDRESS):
$ Select <Change> to blank the
current entry, if necessary.
$ Enter the first group of numbers in
the TCP/IP Address using the main
keypad keys.
$ Enter a ‘dot’ character by pressing the <Control> key, then the <0> key
Twice to select the period’, then the <Right Arrow>key to lock it in.
$ Repeat Steps 2 and 3 for the second and third group of numbers in the TCP/
IP Address.
$ Enter the fourth group of numbers in the TCP/IP Address.
$ Enter the comma (“,”) character by pressing the <Control> key, then the
<0> key Once to select the comma. Press the <Right Arrow> key to
lock it in.
$ Enter the PORT NUMBER. Select <Enter> to save the Primary TCP/IP
Address entry or <Cancel> to discard the changes. Repeat steps for BACKUP
HOST NUMBER (ADDRESS) entry.