Owner Manual

53
MANAGEMENT FUNCTIONS
ACCESS INSTRUCTIONS:
1. From the MAIN MENU screen, se-
lect CONFIGURE TERMINAL.
2. From the CONFIGURE TERMINAL
screen, select ATM MONITOR-
ING.
3. From the ATM MONITORING
screen, select TRITON CONNECT.
4. From the TRITON CONNECT
screen, select TCP/IP CONFIGU-
RATION.
DESCRIPTION:
The TRITON CONNECT function allows
the terminal operator to set up
parameters that control DIAL-UP and
TCP/IP communications between the
ATM and Triton Connect PC-based
software to remotely manage your
Triton Systems ATMs. The following
TCP/IP parameters are accessed
through this function and described on
the following pages:
$$
$$
$ Host Numbers
$$
$$
$ Alarm Numbers
$$
$$
$ TCP/IP Configuration
** Important **
If using, turn Triton Connect <ON>
after entering the Configuration
parameters.
Note: Comms Type Option
You must have the External Ethernet
device installed. For Model 8100/9100
ATMs, this function detects the
communication type installed (Dialup
or TCP/IP) and will not allow user to
change (toggle).
TRITON CONNECT
TCP/IP CONFIGURATION