Owner Manual

52
MODEL 8100 USER / INSTALLATION MANUAL
TEST TCP/IP
DESCRIPTION:
This option allows testing of the TCP/
IP device. When selected, the Ethernet
PCB assembly initializes and resets the
configuration hardware imbedded in the
device. If test is successful, a “Tested
OK” will be displayed.
ERROR CONDITION:
If the test fails, an error message will be
displayed. Check the cable connections
from the External Ethernet device to the
Main board. Possible problems could
be no or incorrect voltage to unit, IF/
Host cable, Main board, or Ethernet
PCB assembly.
Error Code 237 may appear during
operation. This code means there is
a TCP/IP failure.