Owner Manual

A-26
MODEL 8100 USER / INSTALLATION MANUAL
!!
!!
! Using a phillips screwdriver, remove the two (2) front screws that secure the
rail assemblies; retain screws. Next,
loosen the back screws.
!!
!!
! Pivot each slide rail slightly inward. This will allow easier access to secure
the nuts to the plinths mounting screws when installing the ATM cabinet..
1. Lift the ATM cabinet and mount on the plinth assembly’s four (4) mounting
screws.
Front
Plinth
(overhead view of
mounting screws)
Loosen
Remove