Owner Manual

A-18
MODEL 8100 USER / INSTALLATION MANUAL
1. Carefully inspect the shipping container for any damage and report any
damage immediately to the shipping company. Refer to the warranty
information in the User or Service manual (as applicable) for information
about reporting shipping damage.
2. Remove the plinth and ATM cabinet from the carton by cutting the straps
and removing the top of the box.
3. Remove the packing material from inside of the box.
4. Remove the silver key from the white plastic bag attached to the ATM
wrapping.
The following procedure applies to installing the plinth assembly using either
standard (P/N 06200-00066) or chemical (06200-00060) anchor kits. The anchor
kits are not supplied with the unit.
PLINTH INSTALLATION
UNPACK ATM
deriuqeRslooT
,sdnuoptoof06tsaeltaotelbatsujda,hcnerweuqroT
hcnerwtehctarro,hcnerwtnecsercelbatsujda
stniopllirdgnikr
amrof)tnelaviuqero(hcnupretneC
remmaHtekcos)mm91("4/3revirdwercstalfegraL
levelelbbuBhcnerwxob/tekcos"61/7s
elggogytefaS
noitcetorpgniraeH
,)mm21("2/1,)mm6("4/1
-edibrac)mm51("61/9dna
ta-stibllirdyrnosamdeppit
gnol
"6tsael
cirtceleytud-yvaeh"4/3
)remmah/yrator(llird
tlebtroppuskcaBrenaelcmuucavelbatroPhsurberiW
tiKrohcnAdradnatS
srehsawtalf"2/1
epyt-eveels"4/1-4x"2/1
stlobrohcna
stun"2/1
tiKrohcnAlacimehC
dnastunxeH
srehsaw
seluspacrohcnalacimehC
tniop-lesihcdedaerhT
sdor