Product Manual

Installation & Assembly Instructions
Please contact our Customer Service Division with any questions at:
30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙ [e-mail]
For a full line of products visit www.tritonproducts.com 2 INSSLB28041
6. Installation of Casters: Note: Swivel casters will be installed on the end of tool cart with handle. With the tool cart on its side or
hanging over a workbench, align the 4 caster mounting plate holes with holes in bottom tray. Insert truss head bolts with flat washer
through top tray into mounting holes in caster. Install split lock washers and hex head nuts and tighten. (Repeat for each caster.)
Special Note:
Should any of the preinstalled fasteners loosen or fall out during assembly, replace using either a ¼”- 20 or 12-24 threaded nut with
lock washer in its place.
Secure storage for all items can be achieved using LocHook™ locking steel hooks.
Warranty information: Triton Products warrants to the original owner that this product is free from defects in material and
workmanship for a period of two years from the date of the original purchase. If this product is defective when used as
intended under normal household conditions within the specified period, Triton will replace the product, send a replacement
part or issue a refund (at our option) when the consumer provides a proof of purchase (either a bill of sale, receipted invoice or
other proof that the product is within the warranty period), along with a full description of the defect.
Liability: Triton Products and/or its Reseller’s liability are limited to 100% of the purchase price of the product.
5/16” -20 x 3/4” TRUSS HEAD BOLT