Installation Manual

Table Of Contents
Installation Procedures
3-28 © 1999 Triton Network Systems, Inc. All Rights Reserved.
Attaching IFU Cables
To attach the IFU cables:
1 Connect the power, alarm, and fiber optic cable to the IFU locations as
shown in Figure 3-13.
Figure 3-13. IFU Cable Connections
2 Secure the power, alarm, and fiber optic cables to the building with
tie-wraps as needed.
DANGER – HIGH CURRENT HAZARD: Ensure that
the – 48 Vdc power source is set to the OFF position
before beginning the installation procedures for the
Invisible Fiber™ unit.
DANGER – L’HASARD DU COURANT ÉLEVÉ :
S’assurer que le bloc d’alimentation – 48 V CC est en
position HORS TENSION avant d’aborder les procédures
pour l’installation de l’unité Invisible Fiber
MD
.
Transmit
Indicator
Optical Fiber
Power
Alarm/Test
Earth
Ground
Cable