Installation Manual

Table Of Contents
Removing an IFU
5-2 © 1999 Triton Network Systems, Inc. All Rights Reserved.
CONFIDENTIAL & PROPRIETARY
D
O
N
O
T
C
O
P
Y
Servicing an IFU
Servicing an IFU is done at the factory. To service the IFU, remove it and
replace it with a new IFU. Send the IFU needing service to the factory.
Removing an IFU
Removing an IFU is a two-part process:
1 Removing the power and cables from the IFU.
2 Removing the IFU from the mounting bracket.
Removing Cables
To remove power and cables from the IFU:
CAUTION: Ensure that the 48 Vdc power source is set
to the OFF position before attaching power cables to the
Invisible Fiber Unit.
MISE EN GARDE : Sassurer que le bloc dalimentation
48 V CC est en position HORS TENSION avant
dattacher les câbles dalimentation à lunité Invisible
Fibermd.
WA RN IN G : Never touch exposed fiber with any part of
your body. Fiber fragments can enter the skin and are
difficult to detect and remove.
AVERTISSEMENT : Ne jamais laisser une fibre nue
entrer en contact avec une partie quelconque du corps. Des
fragments de fibre peuvent entrer dans la peau, et sont
difficiles à déceler et à enlever.