Installation Manual
Table Of Contents
- List of Figures
- List of Tables
- About This Book
- Warnings and Safety Guidelines
- Avertissements et consignes de sécurité
- Conventions
- Risque de lésions corporelles provoquées par la décharge électrique
- Risque de lésions corporelles provoquées par les câbles à fibres optiques
- Risque de lésions corporelles provoquées par l’exposition de l’énergie radiofréquences
- Autres risques des lésions corporelles
- Risque d’interruption de service
- Autres mises en garde
- Installation Overview
- Staging Procedure
- Installation Procedures
- Commissioning Procedures
- Removing an IFU
- IFU Test Results
- Index
Fast Ethernet Payload Test
28 GHz Fast Ethernet IFU Installation (9/17/99) - R0.1 4-9
CONFIDENTIAL & PROPRIETARY
D
O
N
O
T
C
O
P
Y
Fast Ethernet Payload Test
This test ensures that IFUs function correctly and pass the customer payload
traffic error-free before the IFUs are added to the network.
To perform the payload test:
1 Connect the SmartBits™ test set from the 100BaseFX port 3 to the IFU
Alpha 100BaseFX Add/Drop port on the patch panel with the MT-RJ to
SC fiber adapters (see Figure 4-3).
2 Power up the Laptop and connect the Ethernet port to the SmartBits™ test
set with a CAT-5 cable.
Figure 4-3. Fast Ethernet Payload Test Setup
IFU ALPHA
IFU BETA
LAPTOP
With SmartBits
OUTSIDE BUILDING
INSIDE BUILDING
PATCH PANEL
IFU IFU
Add-Drop
SmartBits TEST SET
Port 3
Add-Drop
Port 4
DEMARCATION BOX
Add-Drop
Add-Drop
Payload
Add-Drop
100BaseFX
SC to SC
MT-RJ to SC
ADAPTER
SC to SC
COUPLER
100BaseFX
SC to SC
MT-RJ to SC
ADAPTER
SC to SC
COUPLER
TM
TM