Installation Guide

Tritan BP
866-771-2345
www.tritanbp.com
 Apply a generous amount of construction adhesive to each panel. We recommend PL Premium or
Enerfoam as the adhesive of choice. Press the panel firmly onto the mounting service and screw or nail
the panel into place.
o We recommend using TapCon screws if install into concrete block.
 Screws / nails should be installed along the tongue among other unnoticeable places. If you need to
further conceal a whole, simply apply a little woof filler to the screw whole and once dry apply a little
touch up.
 Once the first panel is in place, repeat the processes above ensuring that each panel fits tightly and
straight against one another.
 Panels can be mitered on a table saw, we recommend using a blade with 80 teeth or greater when using a
circular saw to cut the panels.
o Universal trim (Inside and outside corners, trim seals, electrical outlet covers) pieces are also
available for purchase.
o The panels must be installed in complete horizontal rows starting at the bottom and working your
way up.
 Approximate Adhesive Needed:
o 4 Panels = 1 tube of PL Premium
o 100 Panels = 1 Tube of Enerfoam
o 8 Accessory Items = 1 tube of PL Premium
o 250 Accessory Items = 1 tube PL Premium