Installation Guide

Tritan BP
1332 W McNab Rd
Fort Lauderdale, FL. 33309
Office/Text/Fax: [phone]
[e-mail]
Touch Up Paint Instructions:
Paint Storage:
 Keep Away from children and animals
 Ensure the lids are tightly closed to prevent spillage.
 Do not allow paints/stains to freeze.
Application instructions:
 As needed, fill any screw/nail wholes, miter joints or other openings with wood filler or bondo. Allow for
the filler to completely dry before moving to the next step.
 Ensure the paint/stain lids are sealed completely. Shake containers well to ensure a good color mix.
 Each color panel has it’s on unique set up paints/stains. Some more than others. At a minimum you will
receive two bottles. The first bottle is the base color, which will be labeled as such. The secondary
bottle(s) will the be actual color tint/stain. Each bottle with be marked with the color.
 Apply the base using a standard paint brush. Paint only the area that is needing touchup. Allow for the
paint to completely dry before moving to the next step.
 Once the base is completely dry, identify which color tint is needed to match the surrounding area of the
panel. Normally just one color will be needed per area. Using a small brush, apply the stain over the
newly painted base. Once applied, lightly wipe the stain with a rag until you achieve the desired effect.
Allow the stain to completely dry.
Helpful Hints:
 Always use a clean dry brush when applying stains.
 Avoid applying stain over existing stain, this can cause the area to darken.