FAQ

Better Products, With Better Solutions.
Tritan BP
1332 W McNab Rd
Fort Lauderdale, FL. 33309
866-771-2345
How many siding panels do I need to purchase? Great questions, that depends on which panel our
interested in. Below is how to measure and calculate the area needed. To simply things you will need
the total square footage which is calculated by Length x Width = SQ FT. Simply take the total SQ FT
needed and divide it by the panel square foot coverage.
HELP?!?! I’m not sure how many siding panels I need. No problem, we are here to be of help. You can
email us at [e-mail]
or call us at 866-771-2345 and we are here to help. Do you have a
blueprint that you need for us to calculate the total square footage for? Please email them to
[e-mail]
Actual SQ. FT. Coverage For Faux Tritan Siding:
Lightning Ridge – 7.2 SQ FT
Earth Valley – 7.55 SQ FT
Canyon’s Edge –7.3 SQ FT
Aged Brick – 6.4 SQ FT
British Brick – 6.6 SQ FT
Faux Concrete – 7.55 SQ FT
Traditions – 7.2 SQ FT
Harvest Ledgestone – 7.1 SQ FT
How will the panels hold up against a weed eater? In a epic battle of panel vs weed eater, the weed
eater will win. However, there is a secret that can be implemented that will defeat the weed eater every
time. Where your house meets the grass install either a small boarder of brick or concrete stones. Make
sure that this layer is level and then install the panels on top of the stones. When the weed eater will hit
the brick or concrete stone and stay far away from the panels.
Can I use the faux siding in the shower? Yes the panels can be installed in a shower. We do recommend
applying a clear coat polyurethane to the panels prior to using the shower. Shower walls can build up
with soap scum and this can over time cause issues with the finish. Appling a clear coat can also allow
for easier cleaning. As always test the clear coat in a small area before applying it to the entire project.
Can the panels be used as a retaining wall? The panels can be installed onto the retaining wall
structure, but cannot be used as the actual structural retaining wall.
Is this really a DIY product, I’ve never done anything like this before? You can do it! No matter your
skill level you can achieve a professional installation. For the novice DIY we have premade corners that
simply butt up against the panels and we are here to support you. Call or email us and we are happy to
walk you through it. See our installation instructions for full details.
Can I install this panels over Concrete Block? Absolutely, any clean dry flat service can be used. We
recommend using a combination of PL Premium and TapCon Screws.