Operation Manual

20
Trouble shooting
Problem Cause Correction
Upper thread breaks 1. The machine is not
threaded correctly.
2. The thread tension is too
tight
3. The thread is too thick for
the needle.
4. The needle is not inserted
correctly.
5. The thread is round wound
the spool pin.
6. The needle is damaged.
1.Rethread the machine.
2. Reduce the thread tension
(lower number).
3. Select a larger needle.
4. Remove and reinsert the
needle (flat side towards the
back).
5. Remove the bobbin and
rewind the bobbin.
6.Replace the needle.
Lower thread breaks. 1. The lower thread is not
inserted correctly.
2. The upper thread tension is
too loose.
1.Check the threading
carefully.
2.adjust the upper thread
tension.
Skipped stitches 1. The needlenis not inserted
correctly.
2. The needle is damaged.
3. The wrong size needle has
been used.
4. The foot is not attached
correctly.
1.Remove and reinsert needle
(flat side towards the back).
2. Insert a new needle.
3.Choose a needle to suit the
the thread and fabric.
4.Check and attach correctly.
Needle breaks
Loose stitches
1.The needle is damaged.
2.The needle is not inserted
correctly.
3.Wrong needle size for the
fabric.
1. The machine is not
threated correctly.
2. The bobbin case is not
correctly threated.
3. Needle/fabric/thread
combination is wrong.
4. Thread tension wrong.
1. Insert a new needle.
2.Insert the needle correctly
(flat side towards the back).
3. Choose a needle to suit the
thread and fabric.
4. Check and attach correctly.
1.Check the threading.
2. Thread the bobbin case as
illustraded.
3. The needle size must suit
the fabric and thread.
4. Correct the thread tension.
Seams puckering 1.The needle is too large for
fabric.
2. The stitch length is wrongly
adjusted.
3. The thread tension is too
tight.
1.Select a finer needle.
2.Readjust the stitch length.
3.Loosen the thread tension.
21
IMPORTANT SAFEGUARDS
• Read all instructions before use.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electric shock, do not immerse cord, plug or appliance in water or
any other liquid.
• Unplug from outlet when not in use and before cleaning. Allow the device to cool
before putting on or taking off parts. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions, or has been damaged in any
manner.
• The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries and invalidate any warranty you may have.
• Do not use outdoors, or on or near direct heat sources
• Do not let cord hang over edge of table or counter, or touch hot surfaces or come
into contact with the hot parts or allow the product to be situated underneath or close
to curtains, window coverings etc.
• This appliance is for household use only and only for the purpose it is made for.
• The appliance must be placed on a stable, level surface.
• This appliance is an attended appliance, and as such should never be left ON or
whilst hot without adult supervision.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Guarantee
• The device supplied by our Company is covered by 24 month guarantee starting on
the date of purchase (receipt).
• During the life of the guarantee any fault of the device or its accessories to material
or manufacturing defects will be eliminated free of charge by repairing or, at our
discretion, by replacing it. The guarantee services do not entail an extension of the
life of the guarantee nor do they give rise to any right to a new guarantee!
• Proof of the guarantee is provided by the proof of purchase. Without proof of
purchase no free replacement or repair will be carried out.
• If you wish to make a claim under the guarantee please return the entire machine in
the original packaging to your dealer together with the receipt.
• Damage to accessories does not mean automatic free replacement of the whole
machine. In such cases please contact our hotline. Broken glass or breakage of
plastic parts are always subject to a charge.
• Defects to consumables or parts subject to wearing , as well as cleaning,
maintenance or the replacement of said parts are not covered by the guarantee and
hence are to be paid!
• The guarantee lapses in case of unauthorized tampering.
• After the expiry of the guarantee repairs can be carried by the competent dealer or
repair service against the payment of the ensuing costs.