Owner`s manual

From the main Screen in Figure 1, simply enter the desired

channel directly on the numeric keypad. For example, if you

want to enter channel “1234”, the screen would appear as in

Figure 2. Once entered, press the Softkey #1 that corresponds

to the selection “OK”. The radio will then be on that channel,

and the display will appear as in Figure 3. You can then

communicate with any other eXRS radio on that same group

channel.

Fig. 1 Fig. 2 Fig. 3

CHANNEL:

CONTACTS MENU

ENTER CHANNEL

1234

OK EXIT

CHANNEL

1234

CONTACTS MENU

4.2 CONTACTS

The Contacts List is where Channels may be stored so they

can be recalled later. The TSX300 can store up to 100

entries. The ﬁrst contact in the list will be the radio’s ID (MY

RADIO). All other contacts are stored in alphabetical order.

My Radio contains the radio’s “Private Channel” number (10000

or higher) and the Caller ID name for the radio. The last item in

the contacts list is the menu selection to “ADD NEW” contacts.

The TSX300 can store a name associated with each stored

number. The name can be up to 8 characters long. The stored

information in Contacts will be retained with power off and/

or batteries removed.

CONTACTS - To enter the CONTACTS menu, Press the Softkey

#1 that corresponds with CONTACTS (per Figure 4) on the

display to enter the Contacts menu. The screen in Figure 5

will appear.

Fig. 4 Fig. 5

CONTACTS

MY RADIO

[ADD NEW]

SELECT VIEW

CHANNEL:

CONTACTS MENU