Owner`s manual

proper synchronization is to re-select or re-enter the contact/channel on the

affected radios.

3.2 Menu System and Softkeys

The keys on the top right and top left of the radio keypad

are Softkeys (Softkey #1 and Softkey #2), and their function

corresponds with what is on the bottom corners of the LCD

display. Thus, the function of these two buttons change,

depending on what menu or function you are working in, and

what the LCD display shows for the key function at any given

time. When standing by on the main screen, the functions of

these two softkeys are “CONTACTS” and “MENU”. From here,

these buttons are used to retrieve the Contacts list and access

the radio’s Menu System.

3.3 Volume Control / Up/Down Scrolling Button

While on the Main screen, Press the UP (p) and DOWN (q)

button to control the volume in 15 steps. The display will

indicate “Volume” and the current volume level for 2 seconds.

An audio chime will also indicate current volume level. All

key beeps will be at the set volume level. While in the

Contacts and Menu functions, this button is used to scroll Up

or Down through the Contact list or Menu options.

3.4 Low Battery Alert

The TSX300 has a 4-level battery meter (shown below) on the

LCD that will graphically emulate the remaining batter power.

At the lowest level, the Battery Low Icon will ﬂash and an

audible beep will sound every two minutes.

Battery Full

Battery Strong

Battery Low

Battery Weak

When the low battery meter is at the lowest level, batteries

should be replaced, or recharged if using the TriSquare TSX-

BP NiMH rechargeable battery pack.

3.5 Call / Back (t) Button Functions

When on the Main screen, this button acts as the Call button

to signal other users, and while in any Menus or Texting, it