Owner`s manual

30 TriSquare Electronics Corporation
#1). See screens shown under CHANGING
CLONING CHANNEL Screens. The Change Cloning
Channel screen will appear. Using the keypad, enter
the channel you wish to use for Cloning (must be
greater than 10000).
NOTE: If you change the channel for one radio, both
radios involved in the Cloning must be changed to this
new Cloning Channel. The new channel will be used
only for the current cloning session.
5 eXRS Accessories
TriSquare offers a variety of accessories for the eXRS radios.
These are:
- Dual Desktop Charging Cradle (TSC1-DC)
- AC/DC Wall Adaptor for TSC1-DC (TSC1-AC)
- NiMH Rechargeable Battery Pack (TSX-BP)
- VOX/PTT Headset w/ Boom Mic (TSX-HS1)
The TriSquare TSX10A accessory kit offers all of the above as
follows:
- 1 Dual Desktop Charging Cradle
- 1 AC/DC Wall Adaptor
- 2 NiMH Rechargeable Battery Packs
- 2 VOX/PTT Headsets w/ Boom Mic
5.1 Dual Desktop Charger (TSC1-DC) and AC/DC Wall
Adaptor (TSC1-AC) Operation:
The TriSquare TSC1-DC Dual Desktop Charger has 2 charging
wells, and can charge the TriSquare TSX-BP NiMH rechargeable
battery packs, either in the radio or out, or a combination of
either of the two.
NOTE: Do not attempt to charge alkaline batteries.
CHANGING CLONING CHANNEL Screens
CLONING
CHANGE CHAN
COPY FROM
OK EXIT
CHANGE CLONING
CHANNEL
_
DELETE DONE
PTT Button and VOX / PTT Switch / Headset Plugged In
PTT Button
VOX/PTT
Switch