Owner`s manual

23
4.3.4.3 ROGER BEEP
Each voice transmission to another eXRS user will be ended
with a “transmission-complete” Roger Beep when the transmit-
ting user releases the PTT button. It will be heard on the receiv-
ing unit. It is used in a similar fashion to the phrase
“Over”, which is used to indicate to the receiving unit that the
transmitting unit has completed its transmission. The TSX300
has a Roger Beep and the ability to turn this function On or
Off. The default setting is On.
- To access the ROGER BEEP menu, from the SETTINGS
Menu (Figure 58), scroll until ROGER BEEP is highlighted
and press OK (Softkey #1). The screen view in Figure 59 will
appear.
- Use the UP / DOWN (p/q) button to scroll between Rog-
er Beep ON and Roger Beep OFF. Once you have highlighted
your preference, press OK (Softkey #1) to accept your selec-
tion and return to the Main screen, or press EXIT (Softkey #2)
to return to the Main screen without making a change.
4.3.4.4 TX TIMEOUT TIMER
The radio may be set to limit the amount of time that it can
continuously transmit. The Timeout settings are in 30 second
intervals of 30, 60, 90, 120 and OFF. The default setting is
•
•
Fig. 53 Fig. 54a
Fig. 54b Fig. 54c
RING TONE
S
RING TONE 1
RING TONE 2
OK EXIT
MENU
RING TONES
CALL ALERT
OK EXIT
RING TONES
RING TONE 3
RING TONE 4
OK EXIT
RING TONES
RING TONE 5
RING TONE 1
OK EXIT
Fig. 56b Fig. 57
CALL ALER
T
VIBRATE
VIB & RING
OK EXIT
+
CHANNEL:
0
CONTACTS MENU
Fig. 58 Fig. 59
SETTI NGS
CALL ALERT
ROGER BEEP
OK EXIT
ROGER BEE
P
ROGER ON
ROGER OFF
OK EXIT
Fig. 55 Fig. 56a
SETTI NGS
RING TONES
CALL ALERT
OK EXIT
CALL ALER
T
RING
VIBRATE
OK EXIT