Owner`s manual

14 TriSquare Electronics Corporation
Contact information screen in Figure 22, press CHANGE (Softkey
#2) to re-enter the information for that contact, starting with the
ENTER NAME screen in Figure 23. Change the name as desired
using the BACK/NEXT buttons (tu), along with the Alpha/Nu-
meric keypad. Press DONE (Softkey #2) to advance to the ENTER
CHANNEL screen (Figure 24). Again, using the BACK/NEXT
buttons along with the keypad, enter the desired channel. When
change is complete, press DONE (Softkey #2) in Figure 24 to
return to the Main screen.
- DELETE – to delete a contact, highlight and VIEW the contact
as described above. Press CHANGE (Softkey #2) to advance to
the ENTER NAME screen in Figure 23. Press DELETE (Softkey
#1) repeatedly until the name is completely removed. Press DONE
(Softkey #2) to delete the contact and return to the Main screen.
NOTE: You can delete a contact by deleting the Channel number
in the same manner as the name.
4.2.3 PRIVATE CHANNEL – A Private Channel is any Channel
associated with another radio’s MY RADIO channel. A Private
Channel is used to contact specific radios regardless of what chan-
nel the radios you are trying to contact are on. Private Channels
are entered into the Contacts list through the Settings Menu, which
is detailed later in this manual under SETTINGS.
4.2.3.1 PRIVATE CALL – When you receive a call on your
Private Channel, your display will indicate a PRIVATE CALL is
being received (Figure 25a). (Exception, if you are on the Private
Channel of the call coming into your Private Channel, it would
then appear as a standard signal reception).
4.2.3.2 CALL WAITING – If it has been within 20 seconds
since your last TX or RX on a channel (not your own Private
Channel) and someone attempts to contact you on your Private
Channel, you will get a Call Waiting screen (Figure 25b). You can
either ACCEPT (Softkey #1) the call to start a new conversation,
or EXIT (Softkey #2) and continue with the existing conversation
on the channel you are on. NOTE: Pressing the PTT button will
transmit on the existing channel that you are on. Therefore you
may continue with your previous conversation (TX or RX) and will
have up to fifteen seconds to accept the call waiting.
4.3 RADIO MENU
o
o
o
Fig. 25a Fig. 25b
PRIVATE CALL
RECEIVE
ID: BOB
END
CALL WAITING
ID: BOB
ACEEPT EXIT