Owner`s manual

12 TriSquare Electronics Corporation
NOTE: MY RADIO channel is always a PRIVATE CHANNEL, as
opposed to a GROUP CHANNEL. The functions and use of Private
Channels and Group Channels are detailed later in this manual.
Operational Scenario: If you have multiple radios
all with the same MY RADIO channel (with different
Caller ID Names), this will effectively act as a private
group channel.
4.2.2 GROUP CHANNEL – A Group Channel may be used
to communicate between 2 or more people, and is not associated
with your MY RADIO entry, or another radio’s MY RADIO entry.
A Group Channel may be any channel from 0 to 9999999999.
All channels entered through the Contacts Menu are entered as
Group Channels. All eXRS radios on the same Group Channel
can communicate with other eXRS radios on the same channel.
- To add a new Group Channel entry into your contact list, press
CONTACTS on the Main Screen (Softkey #1) to enter the CON-
TACTS menu, and scroll UP (p) or DOWN (q) to highlight
the [ADD NEW] function (as in figure 13) and press SELECT
(Softkey #1). The screen in figure 14 will appear. NOTE: If you
have many entries within your Contacts list, you may scroll up to
get to the ADD NEW function quicker which is at the bottom of the
list.
- Enter the name of the new GROUP contact.
- Press DONE (Softkey #2 in Figure 15), and the screen in
Figure 16 will appear. Enter the new Channel number using the
keypad. Once you have the channel number entered, (as in Figure
17) press DONE (Softkey #2) to return to the Main Screen.
- The Group Channel is entered. To view your entry in the
Contacts list, press the CONTACTS button (Softkey #1) and
the screen in Figure 18 will appear. Again, if you have multiple
o
Fig. 13 Fig. 14 Fig. 15
Fig. 16 Fig. 17
CONTACTS
MY RADIO
[ADD NEW]
SELECT VIEW
ENTER NAME
_
DELETE DONE
ENTER NAME
TEAM 1_
DELETE DONE
ENTER CHANNEL
1001001001
DELETE DONE
TEAM 1
1001001001
CHANGE DONE