User's Manual

2020CPC
Operating instructions:
Plug the Cigar Plug Charger into the vehicle’s cigar lighter outlet or power port. Insert the
plug on the Cigar Plug Charger into the microphone/charge jack on the top of the Remote
Transceiver. The red LED on the Remote Transceiver will light and begin blinking in a few
seconds. The periodic blinking of the red LED indicates the charge condition of the battery
as follows:
Battery 0%-25% 1 Red Blink
Battery 50% 2 Red Blinks
Battery 75% 3 Red Blinks
Battery 100% 4 Red Blinks
2020HOC
Operating instructions:
Plug the Home/Office Charger into a standard 120V AC outlet. Insert the plug on the
Home/Office Charger into the microphone/charge jack on the top of the Remote
Transceiver. The red LED on the Remote Transceiver will light and begin blinking in a few
seconds. The periodic blinking of the red LED indicates the charge condition of the battery
as follows:
Battery 0%-25% 1 Red Blink
Battery 50% 2 Red Blinks
Plug into Vehicle Cigar Lighter Outlet or Power Port
Plug into Remote Transceiver’s Charge Jack