User Manual

23
6. UPS Setup and Configuration
6.8 Overload Alarm Setup
OVERLOAD ALARM refers to the point at which the UPS will sound its overload alarm. The factory setting of 105% will provide
adequate overload warnings for most applications, but alternative values from 5% to the 105% default (in 10% intervals) are
available for custom configurations.
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second to
advance to the next
setup screen
Press the button
for 0.1 second to
advance to the next
setup screen
Press the button
for 0.1 second to
advance to the next
setup screen
Press the button
for 0.1 second to
advance to the next
setup screen
Press the button
for 0.1 second to
advance to the next
setup screen
Default
Setting
Set 85%
Set 95%
Set 75%
Set 65%
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second to
advance to the next
setup screen
Set 55%