User Manual

17
6.3 Inverter Frequency Setup
OUTPUT FREQUENCY refers to the cycles per second (Hz) of UPS output power. To configure your UPS to convert frequency
(default 50 Hz) from 50-to-60 Hz or 60-to-50 Hz, set the OUTPUT FREQUENCY to the desired setting.
Inverter Frequency Setup for On-line Mode / Battery Mode
The inverter output frequency cannot be set under the on-line or battery modes. As a result, the LCD will display a warning
message when the user attempts to set this item.
Inverter Frequency Setup for Standby Mode / Bypass Mode
Press the button
for 0.1 second
After 3 seconds
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second to
advance to the next
setup screen
Press the button
for 0.1 second to
advance to the next
setup screen
Set 60 Hz
Default
Setting
6. UPS Setup and Configuration