User Manual

16
6.2 Inverter Voltage Setup
OUTPUT VOLTAGE refers to the nominal output voltage of the UPS. This value is most commonly set to match the prevailing
country or region-specific nominal voltage.
Note: Certain voltage settings will cause automatic de-rating. See specifications on unit label for de-rating info.
Inverter Voltage Setup for On-Line Mode / Battery Mode
The inverter output voltage cannot be set under the on-line or battery modes. As a result, the LCD will display a warning
message when the user attempts to set this item.
Inverter Voltage Setup for Standby Mode / Bypass Mode
Press the button
for 0.1 second
After 3 seconds
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second
Press the button
for 0.1 second to
advance to the next
setup screen
Press the button
for 0.1 second to
advance to the next
setup screen
Press the button
for 0.1 second to
advance to the next
setup screen
Set 220V
Default
Setting
Set 240V
6. UPS Setup and Configuration