User Manual

6.1 Setup Menu

Press the scrolling button for more than 3 seconds to enter the setup menu.

Note: Only qualiﬁed service personnel may perform setup actions. During setup, the following items can be adjusted:

1. Inverter voltage

2. Inverter frequency

3. Frequency converter

4. Bypass range

5. Economy mode

6. Alarm disable

7. Overload alarm

For setup procedures, refer to the following:

1. Press the scrolling button for more than 3 seconds to enter the setup menu.

2. Press the scrolling button for 0.1 second to change the parameter.

3. Press the conﬁrmation button for 0.1 second to conﬁrm your parameter.

4. You can skip to the next setup item by pressing the cancel button for 0.1 second.

5. In setup, press the scrolling button for more than 3 seconds. The LCD will go to the original display.

6. In setup, if no button is pressed for more than 2 minutes, the LCD will exit from the setup menu and return to the original

display.

This UPS supports a variety of advanced conﬁguration options that can be accessed via the front panel LCD screen.

Conﬁguration and information items include Inverter Voltage, Inverter Frequency, Frequency Conversion, Bypass Range,

Economy Mode, Alarm Setup and Overload Alarm Setup. Some settings cannot be changed in certain operation modes. Refer

to the table below for details:

Setup Item Standby Mode On-line Mode Bypass Mode Battery Mode

Inverter Voltage Yes No Yes No

Inverter Frequency Yes No Yes No

Frequency Converter Yes No Yes No

Bypass Range Yes Yes Yes Yes

Economy Mode Yes Yes Yes Yes

Alarm Disable Yes Yes Yes Yes

Overload Alarm Yes Yes Yes Yes

Note: Only qualiﬁed service personnel may perform setup actions.

6. UPS Setup and Conﬁguration