User Manual

2
Parts List
A
20” L x 1.5” W horizontal hook-and-loop
strips (3 pieces)
B
40” L x 1.5” W vertical hook-and-loop
strips (4 pieces)
C
7/8” diameter circular hook-and-loop
pieces (12 pieces)
D
Filter (1 piece)
Installation Procedure
1
Remove self-adhesive backing strips and
install the 3 horizontal hook-and-loop
strips to the top, middle and bottom non-
perforated sections inside the SmartRack
door frame.
2
Following the same procedure, install the
4 vertical hook-and-loop strips to the non-
perforated inside frame of the SmartRack
door.
Note: The SRFILTER kit is prefabricated for the
vertical strips to fit a 48U enclosure. For 42U
and 25U enclosures, measure first and cut
accordingly before removing the self-adhesive
backing.
3
Remove the self-adhesive backing and
install the 12 circular hook-and-loop pieces
in a staggered pattern on the perforated
portion of the door.
Note: Be sure to space the pieces appropriately
to ensure complete coverage of the door to
enable a snug fit.
4
Install the filter on the inside of the door
along all the hook-and-loop pieces.
Note: The filter is also prefabricated to fit 48U
enclosures. For 42U and 25U enclosures, be
sure to measure and cut accordingly before
installation.
2
1
3
4
A
B
C
D
Standard Installation
Warranty Registration
When a filter becomes dirty or worn from use, be sure to replace it. Hook-and-loop pieces can remain attached to door, with no need for
replacement.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite
product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment
or to significantly affect its safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.