User Manual

6
Display UPS/Power Conditions
Line Power Mode LCD Data
The LCD screen offers 6 screens of UPS and site power information as the UPS is operating in line power mode. To advance to
the next screen, press the button. The screens are displayed in this order:
1
2
3
4
5
6
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
230
50
230
1 2
3
4
5
6
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
230
50
230
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
2
1
3
4
5
6
230
50
60
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
2
1
3
4
5
6
230
50
60
1. OUTPUT VOLTAGE 2. INPUT/OUTPUT FREQUENCY 3. OUTPUT LOAD PERCENT
4. OUTPUT LOAD WATTAGE 5. INPUT VOLTAGE 6. BATTERY VOLTAGE
Battery Power Mode LCD Data
The LCD screen offers 6 screens of UPS and site power information as the UPS is operating in battery power mode. When the
UPS switches to BATTERY MODE, the UPS will automatically switch to report ESTIMATED RUNTIME. To advance to the next
screen, press the button. The screens are displayed in this order:
1. ESTIMATED RUNTIME 2. OUPUT VOLTAGE 3. OUTPUT FREQUENCY
4. OUTPUT LOAD PERCENTAGE 5. OUTPUT LOAD WATTS 6. BATTERY VOLTAGE
Basic Operation continued
Enable/Disable Alarm
To enter silent mode, press and hold the button until you hear an audible beep. The icon will appear on the LCD screen
to indicate the unit is in silent mode. To exit silent mode, press and hold the button until you hear an audible beep. The
icon will disappear from the LCD screen to indicate it’s no longer in silent mode. Note: Silent mode can only be selected while
the unit is in online mode. Silent mode will deactivate the beeper completely.
To temporarily mute the alarm while the unit is in battery mode, press and hold the button until the icon flashes on
the LCD screen to indicate that the alarm has been temporarily muted. Note: The low battery alarm will still sound even if the
battery alarm is temporarily muted.
15-02-071-9332B0.indb 6 2/18/2015 10:17:54 AM