User Manual

ManualsBrandsTripp ManualsDisplays & ProjectorsLite Dual Vertical Flat-Screen Desk Mount Monitor Stand Clamp Swivel Tilt 15" to 27" Flat Screen Displays mounting kit - for 2 LCD displays - black

Owner’s Manual

Dual Vertical Flat Screen

Desk or Clamp Mount

MODEL: DDR1527SDC

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR

PROPERTY DAMAGE MAY OCCUR!

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

75 x 75

100 x 100

27”

MAX

8 kg (x2)

(17.6 lb.) (x2)

MAX

Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com

Русскоязычная версия настоящего руководства представлена на веб-сайте компании

Tripp Lite по адресу: www.tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

15-10-034-9334E7-EN.indd 1 10/22/2015 1:34:26 PM

Summary of content (8 pages)

PAGE 1
Owner’s Manual Dual Vertical Flat Screen Desk or Clamp Mount MODEL: DDR1527SDC CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 75 x 75 100 x 100 27” MAX 8 kg (x2) (17.6 lb.) (x2) MAX Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.
PAGE 2
NOTE: Read the entire instruction manual before you start installation and assembly. WARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit www.tripplite.com/support. • This mounting bracket was designed to be installed and utilized ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
PAGE 3
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. Cable Clamp (x2) 3 mm Hex Key (x1) Clamp (x1) Pole (x1) M4X12 (x8) Mount Assembly with VESA Plate (x2) Locating Ring (x2) Base (x1) Top Cap (x1) M4X30 (x8) M6X15 (x3) 4 mm Hex Key (x1) 5 mm Hex Key (x1) Spacer (x8) 3 15-10-034-9334E7-EN.
PAGE 4
1a. Desk Clamp Mounting M6X15 Loosen 4 mm Hex Key • Determine approximate location for mount, keeping in mind display size, height adjustment and pitch/roll requirements. • Slip the desk mount assembly over the edge of desk so that clamp fully contacts desk edge. • Turn the knob to adjust the clamp to edge of desk and secure it tightly. • If desk edge size slightly exceeds the max desktop distance, remove the clamp screw and clamp adjustment plate and reattach the clamp-adjustment plate upside-down.
PAGE 5
2. Installing the Locating Ring Tighten Slide Locating Ring to desired position and tighten. 3. Attaching VESA Plate to Display or M4X12 M4X30 Spacer Lift the display and align the rear mounting holes with the mount assembly’s VESA plate. Attach the display to the VESA plate with the appropriate included screws. Do not over-tighten screws. 5 15-10-034-9334E7-EN.
PAGE 6
4. Installing the Display Using an assistant or mechanical lifting equipment, lift the display with attached Mount Assembly and slide it down onto the pole until it touches the Locating Ring. Make sure the display is safely secured before releasing. Repeat Steps 2 and 3 to install the second display. When completed, insert the Top Cap on the top of the Pole. WARNING: Always ensure both monitors face forward. Turning the monitors to face backward may cause the unit to tip over. 6 15-10-034-9334E7-EN.
PAGE 7
5. Tension Adjustment 3 mm Hex Key 5 mm Hex Key Use the appropriate Hex Keys to adjust the swivel. Turn clockwise to increase tension or counter-clockwise to reduce tension. 6. Cable Management Use the included Cable Clamps to secure and organize the cables to the Pole. 7 15-10-034-9334E7-EN.
PAGE 8
7. Adjustment 360° 20° 360° 20° 23.6” (600 mm) 20° 360° 20° To adjust the desired location or tilt, use the appropriate Hex Key to adjust. Turn clockwise to tighten or counterclockwise to loosen. Maintenance • Check that the bracket is secure and safe to use at regular intervals (at least every three months). • Please visit www.tripplite.com/support if you have any questions. 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 8 15-10-034-9334E7-EN.