User Manual

ManualsBrandsTripp ManualsDisplays & ProjectorsLite Quad Full-Motion Display Flex Arm Desk Mount Monitor Stand Clamp 13" to 27" EA mounting kit - full-motion - for 4 LCD displays - black

Owner’s Manual

Quad Flat Screen Flex Arm

Desk Clamp

MODEL: DDR1327SQFC

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR

PROPERTY DAMAGE MAY OCCUR!

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

75x75/100x100

27”

MAX

10kgx4

(22lbsx4)

MAX

Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com

Русскоязычная версия настоящего руководства представлена на веб-сайте компании

Tripp Lite по адресу: www.tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com

14-06-217-93337F.indd 1 7/23/2014 4:37:19 PM

Summary of content (12 pages)

PAGE 1
Owner’s Manual Quad Flat Screen Flex Arm Desk Clamp MODEL: DDR1327SQFC CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 75x75/100x100 27” MAX 10kgx4 (22lbsx4) MAX Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.
PAGE 2
NOTE: Read the entire instruction manual before you start installation and assembly. WARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit www.tripplite.com/support. • This mounting bracket was designed to be installed and utilized ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
PAGE 3
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. Connector (x1) Adapter Bracket Assembly (x2) Bottom Pole (x1) Desk Clamp Assembly (x1) Top Pole (x1) Package M M4X14 (x16) M5X14 (x16) D5 Washer (x16) Package P 3mm Hex Key (x1) 4mm Hex Key (x1) Base Plate (x1) Pad (x1) 3 14-06-217-93337F.
PAGE 4
1. Remove the VESA Plates 3mm Hex Key VESA Plate VESA Plate • Use Hex Key to loosen the screws in order to separate the VESA plate from the Adapter Bracket Assembly. • Retain these screws for later use. 2. Install the Pole and Desk Clamp Assembly tighten Bottom Pole 3mm Hex Key adjust height tighten collar loosen 3mm Hex Key 3mm Hex Key tighten loosen 3mm Hex Key 3mm Hex Key Top Pole 3. Desk Installation 3a. Edge Installation Note: min. desktop thickness=10mm (.4”) max. desktop thickness=90mm (3.
PAGE 5
3. Desk Installation 3b. Hole Installation Disassemble the desk clamp assembly by removing the clamp adjustment screw, the two clamp adjustment plate screws and the base plate’s three attachment screws. Base Plate Rubber Pad Attachment Screw 4mm Hex Key Re-install the base plate with three retained attachment screws. Tighten securely. Note: min. hole diameter =10mm (.4”) max. hole diameter =70mm (2.
PAGE 6
4. Install Adapter Bracket Assembly Insert the adapter bracket assembly onto the pole and slide it down until it touches the collar. collar tighten adjust handle To tighten the adapter bracket assembly, push the plastic handle in and turn upward until it can turn no more. Then pull the plastic handle out to disengage from the hex bolt and turn it down to the bottom position. Once again, tighten by pushing the plastic handle in and turning upward until it can turn no more.
PAGE 7
4. Install Adapter Bracket Assembly Attach the Top Pole to the Bottom Pole using the Connector and secure the unit with a 3mm Hex Key. Then insert the second adapter bracket assembly onto the top pole and slide it down until it touches the collar. tighten adjust handle 2 3mm Hex Key Top Pole Connector 1 Bottom Pole 7 14-06-217-93337F.
PAGE 8
5. Install VESA Plate Lift the display and align the rear mounting holes with the mount’s VESA plate. Top of Display TV TV TV D5 Washer M4X14 M5X14 Attach the display to the VESA plate with the appropriate included screws. Do not over-tighten screws. 8 14-06-217-93337F.
PAGE 9
6. Install the Displays 3mm Hex Key Using an assistant or mechanical lifting equipment, lift the display with attached VESA plate and slide onto the head of the adapter bracket assembly. Use the screws removed in Step 1 to secure the VESA plate and display to the adapter bracket assembly. Make sure the display is safely secured before releasing. Repeat for displays 2 through 4. 9 14-06-217-93337F.
PAGE 10
7. Cable Management Use clips for routing the cables. Note: Leave slack in the cable for arm movement. 10 14-06-217-93337F.
PAGE 11
8. Adjustment It may be necessary to slightly loosen or tighten the adjustment screw depending on the weight of display installed. 4mm Hex Key 180° 180° 180° 360° +15° – 15° Adjust to the desired position or tilt. 3mm Hex Key Once the displays are adjusted to their final desired position, tighten the collars on the Top and Bottom Poles using a 3mm Hex Key. 11 14-06-217-93337F.
PAGE 12
9. Pivot Adjustment Range Swinging the arm beyond this range may result in the mount slipping off the desk, causing serious injury. Maintenance • Check that the bracket is secure and safe to use at regular intervals (at least every three months). • Please visit www.tripplite.com/support if you have any questions. 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 12 14-06-217-93337F.