Owners manual

2
Table of Contents
A
Ethernet Port: RJ45 jack connects the WEBCARDLX to the network using a
standard Ethernet patch cable. The Link LED
A1
and Status LED
A2
indicate the
operating conditions, as shown in the table on page 3.
B
Micro-USB Port: Use this port to directly connect with a computer running a
terminal emulation program. A cable (part number 73156A) is included with the
WEBCARDLX. If you need to order a replacement cable, contact Tripp Lite
Customer Support at 773.869.1234.
C
Type-A USB Port: Use this port to connect a Tripp Lite ENVIROSENSE 2 module
(E2MT, E2MTDO, E2MTDI, E2MTHDI) for a variety of environmental monitoring and
control options. See www.tripplite.com for more information about these modules.
Note: Do not connect a keyboard or mouse to this port.
Overview ....................................................................................................... 2
Features ........................................................................................................2
Installation ....................................................................................................4
1 - Preparation .............................................................................................4
2 - Dynamic IP Address Assignment ................................................................5
3 - Static IP Address Assignment/Terminal Menu Configuration Settings .............6
4 - Test and Configure ...................................................................................7
Technical Support ..........................................................................................7
Warranty and Product Registration .................................................................8
Features
Overview
The WEBCARDLX allows users to operate any compatible Tripp Lite UPS System or
network-enabled PDU as a managed device on the network, accessible via Web
browser, Network Management Station or telnet/SSH. This manual refers to installing
the card in a UPS system, but the same instructions apply to installing the card in a
compatible PDU.
16-04-234-93358E-EN.indd 2 4/21/2016 3:32:13 PM