Datasheet

Expandable Battery Runtime Supports extended runtime with optional external battery packs
External Battery Pack Compatibility
BP192V1037C-1PH
;
BP192V12-3U
;
BP192V1407C-1PH
;
BP192V557C-1PH
;
BP192V787C-1PH
;
BP192V5RT2U
(limit 1)
DC System Voltage (VDC) 192
Battery Recharge Rate (Included
Batteries)
6 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery
Cartridge
RBC5-192
(qty 1)
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage Regulation Description Online, double-conversion power conditioning
Overvoltage Correction 2% output voltage regulation during overvoltages to 280V (full load) / 300V (90% load or less)
Undervoltage Correction 2% output voltage regulation during undervoltages to 156V (full load) / 100V (50% load or less)
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;
LED/LCD panel rotates for viewing in rack/tower formats (see manual)
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and
execute scrolling LCD functions; A manual bypass switch featured on the detachable PDU allows for complete
removal of the UPS during routine maintenance without disrupting power to connected loads
Alarm Cancel Operation Alarm cancel switch
Audible Alarm Unique audible alarms for all major UPS, environmental and power conditions (see manual)
LED Indicators
6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD
screen offers additional information and control options
SURGE / NOISE SUPPRESSION
UPS AC Suppression Response
Time
Instantaneous
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Included Mounting Accessory
Description
2 sets of adjustable 4 post rack rails included
Installation Form Factors Supported
with Optional Accessories
2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)
Optional Mounting Accessory Notes
2 sets of
2POSTRMKITHD
required for 2 post rackmount installation of separate 4U power module and 2U
transformer
Primary Form Factor Rackmount
UPS Power Module Dimensions
(hwd, in.)
6.85 x 17.5 x 20.7
4 / 6