Owner`s manual

4 – Installation (continued)

4-5 Perpendicular Rack Attachment (2-Post Racks)

Step 1. In order to make perpendicular attachments to a 2-post rack, you will ﬁrst need to install the Perpendicular Junction Plate. To do so,

simplysecuretheJunctionPlatetothetwotopmountingbracketsonthe2-postrack(TrippLitebrand)usingtwoM8HexHead

MachineScrews,M8WashersandM8HexNuts.Note: Diagram is showing the installation of two separate SRLADDERATTACH and

SRCABLELADDER units. Only one Junction Plate is included per SRLADDERATTACH unit.

Step 2. Toattachtheladder,extendtheSRCABLELADDERbetweenyourtwointendedracks(orwall)andattachtheladdertothe

Perpendicular Junction Plate by hooking two J-Hooks around the ladder frame and into the outside holes on the Junction Plate.

SecurethetwohooksusingtwooftheincludedM8WashersandM8HexNuts.Note: Diagram shows installation of two separate

SRLADDERATTACH and SRCABLELADDER units.