Rack Enclosure Extension Frame Owner's Manual

5
48/42U
25U
H
L
90°
2-3
2-4
2-2
2-1
Loosenthescrews
L
attaching the hinge swivels
H
to the vertical
sectionsinthefourlocationsindicated.You will retighten the
screws in the next step, after attaching the frame to the rack
enclosure.
Unscrewthegroundingcableoftherackenclosure’srightrear
doorfromtherackenclosure.(Donotunscrewthecablefromthe
door).Repeatfortheleftreardoor.Savethescrewsandwashers
for later use.
Opentherightreardooruntilitisperpendicular(90degrees)to
the rear of the enclosure, lift it from the hinges and set it aside.
Repeatfortheleftreardoor.(Iftheenclosureisjoinedtoanother
enclosure,turnthedoorbacktowardtheenclosureasyouliftit
fromthehinges.)
With the aid of an assistant, lift the frame, align the frame’s hinge
swivelswiththerackenclosure’shingesandhangtheframefrom
thehinges.Whentheframeissecurelyalignedwiththerack
enclosure, tighten the hinge swivel screws that you loosened in
the previous step.
2-1
2-2
2-4
2 – Fixation du cadre (suite)
2-3