Owner`s manual

8
Adding or Removing Roof Panel
WARNING: Do not attempt to use the roof panel for weight-bearing purposes other than those explicitly described and approved by
Tripp Lite. Do not attempt to add or remove the roof panel without assistance.
Enclosure Configuration
Adding or Removing Side Panels
Removing Side Panel
1
 Openthelatchbyslidingitdownward.
2
Tilt the top of the panel away from the enclosure.
Removing Roof Panel
1
 Pullthe2pinsneartherearoftheroofpanel.Whileholdingthepins,pushtheroofpanel
upward.
2
Remove the roof panel tabs
A
from the roof panel attachment slots
B
in the enclosure frame.
3
Lift the roof panel from the enclosure.
To Reinstall Roof Panel, Reverse Steps 1-3
2
1
1
2
B
A
3
1
2