Owner`s manual

4
Enclosure Installation
Caution! Read All Instructions and Warnings Before Installation!
WARNING: The rack enclosure is extremely heavy. Do not attempt to unpack, move or install the enclosure without assistance.
Until it has been properly installed and stabilized, the enclosure is prone to tipping and could cause property damage and/or
personal injury. Use extreme caution when handling the enclosure and be sure to follow all handling and installation instructions.
Do not attempt to install equipment without first stabilizing the enclosure.
Preparation
Theenclosuremustbeinstalledinastructurallysoundareawithalevelfloorthatisabletobeartheweightoftheenclosure,alltheequipmentthat
willbeinstalledintheenclosureandanyotherenclosuresand/orequipmentthatwillbeinstallednearby.Beforeunpackingtheenclosure,youshould
transporttheshippingcontainerclosertothefinalinstallationlocationtominimizethedistanceyouwillneedtomovetheunitaftertheprotective
packaginghasbeenremoved.Ifyouplantostoretheenclosureforanextendedperiodbeforeinstallation,followtheinstructionsintheStorage and
Service section.
Unpacking
NOTE: The enclosure should be moved as close to the desired installation location as possible before it is unpacked from the
shipping container. Use a forklift or pallet jack to move the shipping container.
Youneedseveraltools(user-supplied):
• 13mmOpen-endWrench
• UtilityBlade
• Carpenter'sLevel
• Phillips-headScrewdriver
Youalsoneedthefollowinghardware(included):
• (50)Phillips-headMountingScrews(M6x5/8")
• (50)CageNuts(M6)
• (50)NylonCupWashers
1
Confirm that the shipping container is upright and stable, then use a utility blade to cut the
shrink-wrapsecuringthecornerprotectors.Applytheutilitybladedirectlyoverthecorner
protectors to prevent the utility blade from scratching the enclosure or cutting the heavy
protectiveplasticbagbeneaththeshrink-wrap.WARNING: Do not scratch the enclosure
or cut the heavy plastic bag beneath the shrink-wrap. Do not push or pull the
enclosure while unpacking.
2
 Removethecornerprotectors.Saveallpackingmaterials(includingthepallet)forlateruse
unlessyouarecertaintheywillnotberequired.Thepackingmaterialsarerecyclable.
3
 Removetheheavyplasticbagsurroundingtheenclosure.Examinetheenclosureforany
damage or loose parts. Confirm that all parts are present. If anything is missing or damaged,
contactTrippLiteforassistance.Donotattempttousetheenclosureifithasbeendamaged.
1
2
3