Owner`s manual

9
Enclosure Configuration
Adding or Removing Roof Panel
WARNING: Do not attempt to use the roof panel for weight-bearing purposes other than those explicitly described and approved by Tripp Lite. Do not attempt
to add or remove the roof panel without assistance.
Removing Roof Panel
1
 Pullthe2pinsneartherearoftheroofpanel.Whileholdingthepins,pushtheroofpanelupward.
2
 Removetheroofpaneltabs
A
from the roof panel attachment slots
B
in the enclosure frame.
3
Lift the roof panel from the enclosure.
To Reinstall Roof Panel, Reverse Steps 1-3
Adding or Removing Side Panels
Removing Side Panel
1
 Openthelatchbyslidingitdownward.
2
Tilt the top of the panel away from the enclosure.
2
1
1
2
1
2
3
A
B